Lockrey Company Products

Anti-galling and Anti-seize compound

Allows intimate contact of threaded parts, plus the advantage of sealing and being able to release parts under heavy loads without damage to threads. Valuable in stainless steel and alloy parts to prevent seizing and to facilitate disassembly without damaging threads.

NSN 8030-01-365-9522 & NSN 8030-01-519-0360-BX

Anti-Friction and Extreme Pressure

Designed for where re-lubrication is a problem and will extend the life of hard to reach lubricating points. Where severe chemical or temperature conditions might cause freezing, galling, carbonization, or oxidation of metal parts exposed to the air, water or salt spray.

NSN 9150-00-664-0050 & NSN 9150-00-935-4018

Circulate Cooling Fluid Lubrication

It meets the needs of applications where the circulating cooling effect of fluid lubrication is needed. Operates for long periods at high temperatures without breakdown with high viscosity index of 25° below zero to 400° above zero.

Solid binder adhesive for dry clean lubrication

Efficient lubricant for extreme Temperatures, Pressures, and Speeds. Apply to any surface by rubbing or touching the surface with a crayon-like solid compound binder. Leaves a thin adhesive film that is tightly held to metal by molecular attraction. Touch to any squealing bearing or chattering slide and hear the noise instantly go away.

Anti-Friction Dry film lubricant

Provides extended service life for dry lubrication with tremendous penetrating abilities. Designed to be used on sliding surfaces, like gaskets to prevent galling, and seizure. Has the natural tendency to adhere to metal surfaces for a superior lubricated service life.

NSN 9150-01-078-4874

Anti-wear additive for Oil, Liquid, Grease lubricants

Reduce wear and heat on moving parts where cooling a volume of oil is required for an engine running hot at high speeds by adding 1 part Liquid-Lockrey-Moly Concentrate to 30 parts of any lubricating oil. After mixing, operating speeds may be increased as much as 600%.